{"id":1584,"date":"2017-12-29T19:43:17","date_gmt":"2017-12-29T19:43:17","guid":{"rendered":"http:\/\/www.ber10thal.com\/blog\/?p=1584"},"modified":"2018-01-02T02:09:17","modified_gmt":"2018-01-02T02:09:17","slug":"a-beginners-woodcarving-journey-part-1","status":"publish","type":"post","link":"https:\/\/ber10thal.com\/blog\/a-beginners-woodcarving-journey-part-1\/","title":{"rendered":"A beginner’s woodcarving journey – Part 1"},"content":{"rendered":"

The squid from the Nintendo game Splatoon, my first carving<\/strong><\/p>\n

\"\"<\/a><\/p>\n

I chose balsa instead of basswood because I didn’t want to struggle with my first carving. I figured it would be hard enough to try to carve a three dimensional figure, I didn’t want to struggle with cutting into the wood. I know you may be thinking basswood is a relatively soft wood, but it’s still hard to a beginner carver.<\/p>\n

\"\"<\/a><\/p>\n

Before starting to carve the squid I looked up videos on the basic cuts and how to make them. Here is the video of the four Basic Cuts to master.<\/a> I also had a model to work from, this helped a lot and I would recommend it. I could twist and turn the model and see it from all different directions. I’m not sure I can remember a lesson I learned from this carving, but I was blown away when I cut entirely through the wood. It was the spot between the legs, when it went completely through the wood, blew my mind. In the end, I wouldn’t recommend balsa wood for carving, but it did help me to get a feel for the carving process without strugging with the wood.<\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Below is a photo from when I first cut entirely through the wood<\/p>\n

\"\"<\/a><\/p>\n